|
|
|
Engine, Emission Technology |
|
903 |
COMBUSTION AND EMISSION CHARACTERISTICS OF WOOD PYROLYSIS OIL-BUTANOL BLENDED FUELS IN A DI DIESEL ENGINE
T. Y. KIM, S. H. LEE
Int J Automot Technol. 2015;16(6):903-912. DOI: https://doi.org/10.1007/s12239-015-0092-4
 
|
Cited By 37 |
|
|
|
|
|
Engine, Emission Technology |
|
551 |
ON-ROAD CHASING AND LABORATORY MEASUREMENTS OF EXHAUST PARTICLE EMISSIONS OF DIESEL VEHICLES EQUIPPED WITH AFTERTREATMENT TECHNOLOGIES (DPF, UREA-SCR)
S. H. LEE, J. H. KWAK, S. Y. LEE, J. H. LEE
Int J Automot Technol. 2015;16(4):551-559. DOI: https://doi.org/10.1007/s12239-015-0056-8
|
|
Cited By 36 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
285 |
LIFE ESTIMATION OF HOT PRESS FORMING DIE BY USING INTERFACE HEAT TRANSFER COEFFICIENT OBTAINED FROM INVERSE ANALYSIS
D. Y. KIM, H. Y. KIM, S. H. LEE, H. K. KIM
Int J Automot Technol. 2015;16(2):285-292. DOI: https://doi.org/10.1007/s12239-015-0030-5
|
|
Cited By 4 |
|
|
|
|
|
Engine, Emission Technology |
|
543 |
ON-ROAD CHASING MEASUREMENT OF EXHAUST PARTICLE EMISSIONS FROM DIESEL, CNG, LPG, AND DME-FUELED VEHICLES USING A MOBILE EMISSION LABORATORY
J. H. KWAK, H. S. KIM, J. H. LEE, S. H. LEE
Int J Automot Technol. 2014;15(4):543-551. DOI: https://doi.org/10.1007/s12239-014-0057-z
|
|
Cited By 35 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
399 |
PREVIEW SUSPENSION CONTROL FOR A FULL TRACKED VEHICLE
I. YOUN, R. TCHAMNA, S. H. LEE, N. UDDIN, S. K. LYU, M. TOMIZUKA
Int J Automot Technol. 2014;15(3):399-410. DOI: https://doi.org/10.1007/s12239-014-0042-6
|
|
Cited By 17 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
75 |
REQUIREMENT-BASED TESTING OF AN AUTOMOTIVE ECU CONSIDERING THE BEHAVIOR OF THE VEHICLE
S. H. LEE, T. W. PARK, K. H. CHUNG, K. H. CHOI, K. K. KIM, K. H. MOON
Int J Automot Technol. 2011;12(1):75-82. DOI: https://doi.org/10.1007/s12239-011-0010-3
|
|
Cited By 5 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
49 |
ANALYTICAL STUDY TO ESTIMATE THE PERFORMANCE OF THE POWER SHIFT DRIVE (PSD) AXLE FOR A FORKLIFT
S. M. PARK, T. W. PARK, S. H. LEE, S. W. HAN, S. K. KWON
Int J Automot Technol. 2010;11(1):49-56. DOI: https://doi.org/10.1007/s12239-010-0007-3
|
|
Cited By 2 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
741 |
PREDICTION OF FATIGUE LIFE AND ESTIMATION OF ITS RELIABILITY ON THE PARTS OF AN AIR SUSPENSION SYSTEM
K. J. JUN, T. W. PARK, S. H. LEE, S. P. JUNG, J. W. YOON
Int J Automot Technol. 2008;9(6):741-747.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
17 |
DESIGN OF INTEGRATED CHASSIS CONTROL LOGICS FOR AFS AND ESP
T. H. HWANG, K. PARK, S.-J. HEO, S. H. LEE, J. C. LEE
Int J Automot Technol. 2008;9(1):17-27.
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
583 |
H∞ LATERAL CONTROL OF AN AUTONOMOUS VEHICLE USING THE RTK-DGPS
J. H. RYU, C. S. KIM, S. H. LEE, M. H. LEE
Int J Automot Technol. 2007;8(5):583-591.
|
|
|
|
|
Other Fields of Automotive Engineering |
|
757 |
Development of an Accelerated Life Test Procedure for Cooling Fan Motors
W. G. SHIN, S. H. LEE, Y. S. SONG
Int J Automot Technol. 2006;7(6):757-762.
|
|
|
|
|
Engine, Emission Technology |
|
441 |
CORRELATION STUDY OF THE MEASURED TUMBLE RATIOS USING THREE DIFFERENT METHODS: STEADY FLOW RIG; 2-DIMENSIONAL PIV; AND 3-DIMENSIONAL PTV WATER FLOW RIG
M. J. KIM, S. H. LEE, W. T. KIM
Int J Automot Technol. 2006;7(4):441-448.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
125 |
INVESTIGATION ON SPRAY CHARACTERISTICS UNDER ULTRA-HIGH INJECTION PRESSURE CONDITIONS
H. S. RYOU, S. H. LEE, J. T. JEONG, J. T. LEE, K. HONG
Int J Automot Technol. 2005;6(2):125-131.
|
|
|
|
> Browse Articles > Author Index
